LX-Brand polymer mai mannewa da kai wanda aka gyara bitumen membran hana ruwa

Hanyar hana ƙwayar cuta:

1.Za ka iya zabar daya daga cikin wadannan 3 hanyoyin: zafi narke adhibiting, sanyi adhibiting, ko zafi narke adhibiting hade tare da sanyi adhibiting hanya, watau ga babban ɓangare na membrane, sanyi adhibiting soma, yayin da overlaps, zafi narke adhibiting soma. .

2.Hot narkewa: don zafi da substrates ko baya surface da torcher ko sauran hita a ko'ina, a lokacin da bitumen fara narke da kuma nuna haske baki launi, za ka iya adhibit da membrane tare da ci gaba dumama, kuma a halin yanzu m da membrane ta roba abin nadi; daidaita harshen wuta zuwa yanayin da ya dace, kuma kiyaye zafin jiki a kusa da 200-250 digiri Celsius, bayan kammala adhibiting na membrane, sa'an nan rufe overlaps tare da sanyi m / sealant.

3.Cold adhibiting: to pre-coat bitumen primer a kan substrates tare da ko da kauri, jira wani lokaci da kuma har zuwa na'urar bushewa, sa'an nan kuma adhibit da membrane, a halin yanzu, compact da membrane ta roba abin nadi; idan yanayin zafi kasa zuwa 15 digiri. Celsius, ana buƙatar narkewar zafi don hatimi mai rufi / gefen / ƙarshen.

Sake: Gyara a kan matsayi: Idan an hana membrane mai Layer guda ɗaya kuma akwai tsayi mai tsayi, nisa mai tsayi ya kamata ya zama fiye da 10cm, nisa mai jujjuyawa ya kamata ya zama fiye da 15cm; idan an hana membrane mai Layer biyu, A tsaye zoba nisa ya zama fiye da 8cm, transverse zoba nisa ya zama fiye da 10cm. The zoba sassa dole ne a haramta da tabbaci, duk wani jahilci na wani dumama ko wani primer shafi ba a yarda; dumama da kuma tabbatar da kadan karin narkewa bitumen exuded zuwa rufe gefen ko mafi sanyi manne / sealant don rufe gefen.

Kayan aiki da na'urorin haɗi: Spade, tsintsiya, ƙura mai hurawa, guduma, chisel; Almakashi, tef ɗin band, akwatin layi mai kyau, goge, goge, abin nadi. Kai guda ɗaya ko wutar lantarki / dumama. Primer, sealant ga gefuna, matsi tube don iyakar.

Membrane yana hana:

surface na substrate dole ne m, mai tsabta, bushe, danshi abun ciki ya zama kasa da 9%, to pre-coat bitumen primer a kan substrates tare da ko da kauri, jira wani lokaci da har zuwa na'urar bushewa, sa'an nan adhibit da membrane; ƙarfafa kariya na kariya na ruwa / jiyya ya kamata a yi zuwa ga haɗin gwiwa / gefuna / ƙare inda ya cancanta.

Dangane da layi mai kyau don tabbatar da jerin abubuwan da aka haramta da kuma jagora, ba da kulawa ta musamman ga buƙatun masu zuwa:

(1) Don hana rufin: Membran ya kamata a dage farawa a cikin dige-gefe adhibiting ko a banded adhibiting; cikakken adhibiting ya kamata a yi a kalla 80cm daga gefen rufin; Don rufin da aka karkata, rabon adhibiting ya kamata ya zama fiye da 70%, yayin da ake buƙatar cikakken adhibiting tsakanin babba da ƙasa.

(2) Don ginshiƙi bene: da adhibiting tsakanin membrane da substrate, za ka iya daukar digege adhibiting / cikakken adhibiting / banded adhibiting / iyaka adhibiting, duk da haka, cikakken adhibiting Hanyar da ake bukata tsakanin babba da kuma ƙarƙashin membranes.

(3) Don bango na tsaye na ginshiƙi, cikakkiyar hanyar adhibiting yakamata a ɗauki;

(4) Don sassan da aka ƙarfafa na yau da kullun, ana buƙatar cikakken hanyar adhibiting, yayin da ga haɗin gwiwar nakasawa, hanyar hana iyaka ta yarda.